Area 3. Toolbar

This area displays tools for building the schematic, as well as some settings.

Select image to enlarge

It contains the following elements:

Hide/show object navigator
— hide/show the object navigator;

Color indication modes
— color indication modes. Clicking this button opens a list of color indication modes created by the user. In this menu you can also create color indication modes for calculated pipeline parameters: specify a color, a parameter, and boundary values of the parameter;

Actions to undo
— list of actions to undo. Clicking this button opens a list of the last actions performed on the model;

Pointer
— This tool is used to move Integrated Model objects on the schematic. After selecting this option, you can click an object and, holding LMB, move the object anywhere on the schematic;

View mode
— This tool is used for simple viewing of the model;

Delete object
— This tool is used to delete objects from the model. After selecting this option, you can click the network object that you want to delete;

Copy selected object
— This tool is used to copy objects. To use it, select an object in the model, click the button, then click an empty place in the graphical interface and enter the name of the new object. The copied object is displayed in the graphical interface;

Activate/deactivate
— Clicking this button activates or deactivates all selected objects;

Add pipeline
— This tool is used to add pipelines to the model. After selecting this option, hover the cursor over the object from which the pipeline should be built, then click LMB on the start object, then click LMB on the end object;

Add connection
— This tool is used to add connections to the model. After selecting this option, hover the cursor over the object from which the connection should be built, then click LMB on the start object, then click LMB on the end object;

Add joint
— This tool is used to add joints to the model. After selecting this option, click LMB on an empty place on the schematic, after which a "Joint" object is added to it;

Add script
— This tool is used to add a script to the model. After selecting this option, click LMB on an empty place on the schematic, after which a "Script" object is added to it;

Add well
— This tool is used to add wells to the model. After selecting this option, click LMB on an empty place on the schematic, after which a "Well" object is added to it;

Add source
— This tool is used to add sources to the model. After selecting this option, click LMB on an empty place on the schematic, after which a "Source" object is added to it;

Add sink
— This tool is used to add sinks to the model. After selecting this option, click LMB on an empty place on the schematic, after which a "Sink" object is added to it;

Add choke
— This tool is used to add chokes to the model. After selecting this option, click LMB on an empty place on the schematic, after which a "Choke" object is added to it;

Add generic equipment
— This tool is used to add "Black box" objects to the model. After selecting this option, click LMB on an empty place on the schematic, after which a "Black box" object is added to it;

Add separator
— This tool is used to add separators to the model. After selecting this option, click LMB on an empty place on the schematic, after which a "Separator" object is added to it;

Add three-phase separator
— This tool is used to add three-phase separators to the model. After selecting this option, click LMB on an empty place on the schematic, after which a "Three-phase separator" object is added to it;

Add pump
— This tool is used to add pumps to the model. After selecting this option, click LMB on an empty place on the schematic, after which a "Pump" object is added to it;

Add compressor
— This tool is used to add compressors to the model. After selecting this option, click LMB on an empty place on the schematic, after which a "Compressor" object is added to it;

Add inflow
— This tool is used to add inflows to the model. After selecting this option, click LMB on an empty place on the schematic, after which an "Inflow" object is added to it;

Add heat exchanger
— This tool is used to add heat exchangers to the model. After selecting this option, click LMB on an empty place on the schematic, after which a "Heat exchanger" object is added to it;

Add sub-flowsheet
— This tool is used to add sub-flowsheets to the model (for example, to group several wells into one pad). To add a sub-flowsheet, select the objects that will be included in it, then click the "Add sub-flowsheet" button and enter a name. The sub-flowsheet is displayed in the graphical interface. To enter a sub-flowsheet, press Shift + LMB;

Extract sub-flowsheet
— This tool is used to extract sub-flowsheets onto the overall schematic. To extract a sub-flowsheet, select it, then click the "Extract sub-flowsheet" button. All objects of the sub-flowsheet are displayed on the overall schematic.

Tool selection button
Tools — After clicking this button, a drop-down list of tools opens (Model Validation, Model Tabular Editor);

Settings button
— Settings button (settings are described in more detail in section 8).