Locally stored Equipment Catalog
Data structures are identical to the global catalog
1.List of pipes with their properties
The second row is the column list.
The third and subsequent rows are the table.
Column list:
NAME - pipe name [required field]
OUTERDIAM - outer diameter, mm [by default 73]
INNERDIAM - inner diameter, mm [by default 62]
ROUGHNESS - roughness, mm [by default 1.524e-2]
MASS - Linear mass, kg/m [by default 5]
*/
PIPING
[NAME] [OUTERDIAM] [INNERDIAM] [ROUGHNESS] [MASS]
[Name] [outer diameter, mm] [inner diameter, mm] [roughness, mm] [Mass, kg/m]
'7-28' 7.0 5.75 0.0065 28.0
'6.5-28' 6.5 5.0 0.0065 28.0
/
2.Pump section data
The first row is the section name [required row]
Subsequent rows are in key-value format:
MANUFACTURER - Manufacturer (designation, string) [by default 'BORETS']
SERIES - Series (designation, string) [by default '5']
NOMINALRATE - Nominal flow rate, m³/day [by default 72]
FREQUENCY - Nominal frequency, Hz [by default 60]
POLSTAGES - Number of polynomial stages [by default 1]
LOADFACTOR - Load factor, n/a [by default 0]
OUTERDIAM - Outer diameter, mm [by default 92]
SHAFTDIAM - Shaft diameter, mm [by default 17]
MINRATE - Minimum flow rate, m³/day [by default 48]
MAXRATE - Maximum flow rate, m³/day [by default 96]
BREAKRATE - Chart flow rate, m³/day [by default 163]
MASS - Mass, kg [by default 189]
LENGTH - Length, m [by default 5.212]
Polynomials:
HEADPOL - head polynomial (arbitrary number of values) [by default 2.44E+01 1.08E-02 -4.72E-05 1.59E-07 -2.79E-10 1.34E-13 0.00E+00]
POWERPOL - power polynomial (arbitrary number of values) [by default 9.98E-02 2.76E-04 -1.40E-07 -5.07E-10 1.00E-12 -4.79E-16 0.00E+00]
*/
ESCPHOUSING
'BORETS 5-ESPM5-60'
MANUFACTURER 'BORETS'
SERIES '5'
NOMINALRATE 72.0
FREQUENCY 60
POLSTAGES 1
LOADFACTOR 0.0
OUTERDIAM 92.0
SHAFTDIAM 17.0
MINRATE 48.0
MAXRATE 96.0
BREAKRATE 163.0
MASS 189.0
LENGTH 5.212
HEADPOL 2.44E+01 1.08E-02 -4.72E-05 1.59E-07 -2.79E-10 1.34E-13 0.00E+00
POWERPOL 9.98E-02 2.76E-04 -1.40E-07 -5.07E-10 1.00E-12 -4.79E-16 0.00E+00
/
3.Actual points for calculating the head polynomial
The first row is the ESP section name [required row]
The second and subsequent rows:
[Rate, m³/day] [Head, m]
*/
ESCPHEADMATCHPOINTS
'BORETS 5-ESPM5-60'
32.0 366.0
95.0 305.0
318.0 256.0
556.0 232.0
/
4.Actual points for calculating the power polynomial
The first row is the ESP section name [required row]
The second and subsequent rows:
[Rate, m³/day] [Power, kW]
*/
ESCPPOWERMATCHPOINTS
'BORETS 5-ESPM5-60'
32.0 30.0
95.0 28.0
318.0 29.0
/
5.ESP and PCP motor data
The first row is the motor name [required row]
Subsequent rows are in key-value format:
MANUFACTURER - Manufacturer (designation, string) [by default 'BORETS']
SERIES - Series (designation, string) [by default '103']
MAXTEMP - Maximum temperature, °C [by default 200.0]
MAXFREQUENCY - Maximum frequency, Hz [by default 70.0]
OUTERDIAM - Outer diameter, mm [by default 103.0]
SHAFTDIAM - Shaft diameter, mm [by default 12.0]
SHAFTPOWER - Maximum high strength shaft power, kW [by default 240.0]
POLEPAIRS - number of pole pairs [by default 1]
LENGTH - Length, m [by default 6.748]
Nominal operating parameters in key-value format:
SPEED - Speed, rpm (mechanical angular rotational speed) [by default 3000.0]
EFFICIENCY - Efficiency, % [by default 79.4]
POWERCOEF - Power factor, n/a [by default 79.4]
SLIPPAGE - Slippage, % (may be replaced with downhole motor type — induction or PMM) [by default 0]
POWER - Power, kW [by default 27.2]
VOLTAGE - Voltage, kV [by default 2.0]
AMPERAGE - Current, A [by default 14.0]
Polynomials:
AMPERAGEPOL - current polynomial (arbitrary number of values) [by default 0.458 0.1161]
EFFICIENCYPOL - efficiency polynomial (arbitrary number of values) [by default 0.08585 0.16291]
SPEEDPOL - speed polynomial (arbitrary number of values) [by default 3 000.00 -90.0]
*/
ESMOTOR
'EDB-103'
MANUFACTURER 'BORETS'
SERIES '103'
MAXTEMP 200.0
MAXFREQUENCY 70.0
OUTERDIAM 103.0
SHAFTDIAM 12.0
SHAFTPOWER 240.0
POLEPAIRS 1
LENGTH 6.748
Nominal operating parameters
SPEED 3000.0
EFFICIENCY 79.4
POWERCOEF 0.835
SLIPPAGE 0
POWER 27.2
VOLTAGE 2000.0
AMPERAGE 14.0
AMPERAGEPOL 0.458 0.1161
EFFICIENCYPOL 0.08585 0.16291
SPEEDPOL 3 000.00 -90.0
/
6.Separator data
The first row is the separator name [required row]
Subsequent rows are in key-value format:
MANUFACTURER - Manufacturer (designation, string) [by default]
POWER - Power consumption, kW [by default]
MAXSEPARATION - maximum separation coefficient, % [by default]
MINRATE - Minimum flow rate, m³/day [by default]
MAXRATE - Maximum flow rate (maximum throughput), m³/day [by default]
OUTERDIAM - Outer diameter, mm [by default]
SHAFTDIAM - Shaft diameter, mm [by default]
MASS - Mass, kg [by default]
LENGTH - Length, m [by default]
Polynomials:
RATEPOL - rate polynomial (arbitrary number of values) [by default]
*/
ESCPSEPARATOR -- Gas Separator or Bolt on intake
'SEP-120'
MANUFACTURER 'BORETS'
POWER 2.0
MAXSEPARATION 0.9
MINRATE 10
MAXRATE 300.0
OUTERDIAM 36.0
SHAFTDIAM 12.0
MASS 400.0
LENGTH 50.0
RATEPOL 1.0 2.0 4.0 5.0 6.0
/
7.List of cables with their properties
The second row is the column list.
The third and subsequent rows are the table.
Column list:
NAME - Cable name [required field]
MANUFACTURER - Manufacturer (designation, string) [by default]
TYPE - Cable type, FLAT||ROUND [by default]
SIZE - Size including insulation, mm [by default]
MAXVOLTAGE - Maximum voltage, kV [by default]
RESISTANCE - Resistance, Ohm/m [by default]
INDRESISTANCE - Inductive resistance, Ohm/m/Hz [by default]
TEMPCOEF - Temperature coefficient, °C/A² [by default]
COREDIAM - Core diameter (copper), mm [by default]
WIDTH - Width, mm [by default]
THICKNESS - Thickness, mm [by default]
MAXTEMP - Maximum temperature, °C [by default]
*/
ESCABLE
[NAME] [MANUFACTURER] [TYPE] [SIZE] [MAXVOLTAGE] [RESISTANCE] [INDRESISTANCE] [TEMPCOEF] [COREDIAM] [WIDTH] [THICKNESS] [MAXTEMP]
'SL212-PPOTB' 'BORETS' FLAT 6.0 5.0 0.0002 7.0E-7 0.038 2.8 49.4 18.6 200.0
/
8.List of extensions with their properties (they differ from cables only by having a connector)
The second row is the column list.
The third and subsequent rows are the table.
Column list:
NAME - Cable name [required field]
MANUFACTURER - Manufacturer (designation, string) [by default]
CONNECTOR - Motor connector, string [by default]
TYPE - Cable type, FLAT||ROUND [by default]
SIZE - Size including insulation, mm [by default]
MAXVOLTAGE - Maximum voltage, kV [by default]
RESISTANCE - Resistance, Ohm/m [by default]
INDRESISTANCE - Inductive resistance, Ohm/m/Hz [by default]
TEMPCOEF - Temperature coefficient, °C/A² [by default]
COREDIAM - Core diameter (copper), mm [by default]
WIDTH - Width, mm [by default]
THICKNESS - Thickness, mm [by default]
MAXTEMP - Maximum temperature, °C [by default]
*/
ESMLE
[NAME] [MANUFACTURER] [CONNECTOR] [TYPE] [SIZE] [MAXVOLTAGE] [RESISTANCE] [INDRESISTANCE] [TEMPCOEF] [COREDIAM] [WIDTH] [THICKNESS] [MAXTEMP]
'MLE, ESP flat B 319 KELB P' 'BORETS' '-' FLAT 6.0 5.0 0.0002 7.0E-7 0.038 2.8 49.4 18.6 200.0
/
9.List of SRP rods with their properties
The second row is the column list.
The third and subsequent rows are the table.
Column list:
NAME - Rod name [required field - identifier for adding rods to the well model]
DIAM - Diameter, mm [by default]
DENSITY - density, kg/m³
WEIGHT - Rod weight in air, N/kg
STRESS - Allowable stress, atm
TENSILE - Tensile strength, atm
YIELD - Yield strength, atm
ELASTICITY - Elasticity, atm
YOUNGSMODULUS - Young's modulus, atm
COUPLINGDIAM - Coupling diameter, mm
*/
RODS
[NAME] [DIAM] [DENSITY] [WEIGHT] [STRESS] [TENSILE] [YIELD] [ELASTICITY] [YOUNGSMODULUS] [COUPLINGDIAM]
'GOST_16' 16.0 2000.0 7.8 980 6120 4086 493570 493570 38.0
/
10.List of SRP pumping units
The second row is the column list.
The third and subsequent rows are the table.
Column list:
NAME - Pumping unit name [required field - identifier for adding rods to the well model]
MANUFACTURER - Manufacturer (designation, string) [by default]
UNBALANCE - Structural unbalance, H
RODCAPACITY - Polished rod load, H
TORQUEFACTOR - Torque factor, mm
DISTANCEA - Distance from walking beam support to polished rod line, mm
DISTANCEC - Walking beam length from tail bearing to center bearing, mm
DISTANCEI - Horizontal distance between walking beam support axis and gearbox output shaft axis, mm
DISTANCEP - Pitman length, mm
DISTANCEH - Distance between walking beam support and horizontal, mm
DISTANCEG - Distance between gearbox output shaft and horizontal, mm
CRANKRADIUS - Crank radius, mm
STROKELENGTH - Stroke lengths, mm
*/
SRPUMPINGUNITS
[NAME] [MANUFACTURER] [UNBALANCE] [RODCAPACITY] [TORQUEFACTOR] [DISTANCEA] [DISTANCEC] [DISTANCEI] [DISTANCEP] [DISTANCEH] [DISTANCEG] [CRANKRADIUS] [STROKELENGTH]
'M-640D-305-168' 'Lufkin' -21618.349 135670.71 1910.258 8483.6 6858 5145.024 4914.9 7496.302 2848.102 1614.424 4267.2
/